2 Stall Restroom Trailer Rental

The 2 Stall Restroom Trailer is the compact unit for small crews, early phases, and tight placements. Superintendents order it in multiples for distribution-center and plant shutdown windows on generator power, and public agencies use it on highway and utility corridors where facilities relocate every few weeks. It has two private restrooms, each with its own exterior door.

Get a Quote (844) 900-3190

Specifications

Door configuration: 2 exterior doors, one per private restroom
Fixtures: 2 toilets, 1 urinal, 2 sinks
Crew capacity: 10 to 40 workers per shift
Body length: 12 ft
Overall length (with tongue): 15 ft
Body width: 8 ft
Width (with steps deployed): 9.5 ft
Height: 11 ft
Empty weight: 4,200 lb
Fresh water tank: 125 gal
Waste tank: 250 gal
Power: Summer 1 x 20A/120V circuit; winter 2 x 20A/120V circuits
Climate control: Air conditioning and heat

Most common build shown. Tank sizes, circuit counts, and weight vary by unit and are confirmed on your quote.

Floor Plan · 2 Stall Restroom Trailer

Crew capacity is a planning range. The OSHA construction sanitation minimums (29 CFR 1926.51) are a floor, not a target: plan for peak trade headcount and for break-time demand, and count hand-wash stations separately. Your safety officer makes the compliance determination.

What the door configuration means

Each restroom is a private room with its own exterior door, a toilet, and a sink; one of the two also has a urinal. The doors can be signed men's and women's, or both all-gender. There is no shared interior. Waste drops by gravity from each fixture to the tank; there is no pump or macerator in the waste path.

Site requirements

Pad: level, firm, and drainable. Soft ground after rain is the most common delivery-day problem.
Access, question one: can the delivery truck spot the trailer? Plan about 40 ft of straight-line approach for truck and trailer.
Access, question two: can the service truck reach the trailer on every visit for the life of the job? A spot that works on day one can be boxed in by month three.
Power: the circuit count is in the spec list. We confirm the connection type with your electrician before delivery day. Where the temp pole is not energized, a generator sized to the actual load carries the trailer until shore power is ready.
Water: a potable hose connection within 100 ft, or a hauling plan. On a site with no water, a water box supplies the trailer.
Waste: onboard tank, pumped out on each service visit. A sewer connection is optional where one exists.
Winter: heated interior, heat trace on supply and drain lines, and HeatLock skirting around the undercarriage, sized to the unit on your quote.
Site access for our technician: the same badging, orientation, and background checks as everyone else on site. Prequalification paperwork (certificate of insurance with your site wording, EMR, safety plan, W-9, Avetta or ISNetworld profile) typically needs about two weeks ahead of the delivery date.

How servicing works

Each scheduled visit: waste pump-out, fresh-water fill, interior clean (floors, fixtures, surfaces), consumable restock (paper, towels, soap), function check (plumbing, lighting, HVAC, heat trace), and a documented record of the visit.
Cadence: weekly to twice weekly for a small crew. On a shutdown window a technician stays on site through the window for restock, fueling, and repairs.
Pump-out, water fill, and clean/restock are quoted as separate named lines, per visit.
Long jobs bill in 28-day periods. Short terms are available for shutdown windows. Minimum terms attach to each line and are stated on your quote.
A broken fixture is repaired on the next scheduled visit or sooner.